Verified November 15, 2026 against toronto.ca.
Toronto will pay up to $6,650 to flood-proof your basement — if the work qualifies. As of May 1, 2026, the City of Toronto’s Basement Flooding Protection Subsidy Program pays 80% of the invoiced cost of specific flood-protection work, up to a cap per item. The expanded amounts apply to work completed on or after November 12, 2025. The old maximum was $3,400 — if a website still quotes $3,400, $1,250 for a backwater valve or $1,750 for a sump pump, those are the old figures.
What the City pays (work completed on or after Nov 12, 2025)
| Item | City pays | Maximum |
|---|---|---|
| Home plumbing assessment (one-time) | 80% of invoice | $500 |
| Backwater valve + alarm | 80% | $1,600 per device, max 2 devices |
| Sump pump + alarm | 80% | $2,250, max 1 device |
| Battery backup for the sump pump | 80% | $300 |
| Weeping-tile (foundation drain) severance & capping | 80% | $400 |
| Total ceiling | $6,650 per property |
$6,650 = $500 + $3,200 (two valves) + $2,250 + $300 + $400. Most homes will not use every line — read $6,650 as a ceiling, not a cheque. Each item also has a lifetime maximum per property: if a previous owner already claimed a sump pump subsidy at your address, you cannot claim it again. Check a property’s subsidy history at BasementFlooding@toronto.ca or 416-338-7668.
Worked example: A sump pump invoice of $2,000 (labour, materials and taxes included) → 80% = $1,600 subsidy, under the $2,250 cap. A backwater valve invoice of $2,500 → 80% = $2,000, capped at $1,600.
Who can apply
- Registered owner of a single-family, duplex, triplex or fourplex home in the City of Toronto.
- Downspouts from the eavestrough must already be disconnected from the City sewer, or you hold a City exemption (disconnecting downspouts itself is NOT eligible for a subsidy).
- No outstanding taxes or debts owed to the City when the application is processed.
- Your contractor — and any sub-contractor — must hold a valid City of Toronto business licence at the time of the work (verify with the City’s Business Licence Lookup tool or 416-392-6700; a contractor without one means funding is denied).
- Licence types that can do this work: Plumbing Contractor (T94), Plumbing and Heating Contractor (T92), Drain Contractor (T87); Building Renovator (T85) can do sump pumps and pipe severance/capping only.
- Apply within two years of each installation (one year for work completed before Nov 12, 2025).
- The City says it can take up to 10 weeks to receive the subsidy.
- Submitting an application does not guarantee one — subsidies are first-come, first-served and subject to annual funding approved by City Council.
The steps that catch people out
- Backwater valve: get a building permit first, and get it inspected. Do not enclose or cover the valve before the inspection is complete. The City may photograph it.
- Sump pump: take photos of the pump and the discharge pipe at the exterior of the property for the application. The discharge must empty onto a permeable surface (lawn, garden, gravel) at least two metres from the foundation wall.
- Battery backup: itemize it separately on the invoice. If the pump and backup are on one lump-sum line, the City cannot split them.
- Assessment: your licensed plumber completes the City’s Home Plumbing Assessment Form and gives you a copy. You do not have to do the recommended work to get the $500 assessment subsidy.
- Invoices must be the original electronic invoices, marked “paid in full”, showing contractor name/address, property address, completion date, and an itemized cost breakdown.
What the subsidy does NOT cover
General interior or exterior waterproofing, crack injection and foundation repair are not on the City’s eligible list — the program pays for the five items in the table above. A sump pump also needs no building permit (the permit step is for backwater valves only).
Old vs new amounts (why so many sites are wrong)
| Item | Old maximum | New maximum |
|---|---|---|
| Per-property maximum | $3,400 | $6,650 |
| Backwater valve | $1,250, max 1 device | $1,600 per device, max 2 |
| Sump pump | $1,750 | $2,250 |
| Battery backup / assessment | Not covered | $300 / $500 |
| Application deadline | 1 year | 2 years |
Frequently asked questions
Up to $6,650 per property — 80% of each eligible invoice, capped per item.
Yes, if it was completed on or after November 12, 2025, and you apply within two years of the installation.
No — the building-permit step in the City’s process is for backwater valves. A sump pump needs photos of the pump and exterior discharge pipe instead.
Only up to the lifetime maximum per item per property. Check the address history with the City first (BasementFlooding@toronto.ca, 416-338-7668).
The City says up to 10 weeks after a complete application. Incomplete applications are not processed.
Call to action
Flood-proofing starts with knowing which of the five items your house actually needs. Reliable Source Plumbing & Drain Ltd. — Danny holds a Master Plumber licence, and the company holds City of Toronto business licence T94-5410854 (Plumbing Contractor) — does the City’s home plumbing assessment and installs backwater valves and sump pumps across Toronto, York, Etobicoke and Brampton. Call 24/7: (289) 233-7221.